Remove my "oil change reminder message
 

I change my own oil but don't know how to reset the electronic message: change oil.

Taken from the Chrysler 200 owners manual . . . . .

To reset the oil change indicator system (after
performing the scheduled maintenance), refer to the
following procedure.

1. Without pushing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (do not start the engine).

2. Fully push the accelerator pedal, slowly, three times
within 10 seconds.

3. Without pushing the brake pedal, push the ENGINE
START/STOP button once to return the ignition to the
OFF/LOCK position.

NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.

Umm The poster did not even indicate which year model they have..... Could have KEY not Start button... lol