Remove my "oil change reminder message

[skhouzam]

I change my own oil but don't know how to reset the electronic message: change oil.

[HotTub]

Taken from the Chrysler 200 owners manual . . . . .

To reset the oil change indicator system (after
performing the scheduled maintenance), refer to the
following procedure.

1. Without pushing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (do not start the engine).

2. Fully push the accelerator pedal, slowly, three times
within 10 seconds.

3. Without pushing the brake pedal, push the ENGINE
START/STOP button once to return the ignition to the
OFF/LOCK position.

NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.

[Gearhead43]

Umm The poster did not even indicate which year model they have..... Could have KEY not Start button... lol